100pcs 2mm x 3mm (Approximately 1/16" x 1/8") Cylinder Magnets

Cylinder magnets like these are taller than they are wide, which lets them sit deep in a drilled hole and hold much harder than a thin disc. At 2mm x 3mm they're a strong little magnet - good for load-bearing joints on miniatures and models, magnetizing heavier resin or metal parts, modular terrain, and anywhere a flat disc wouldn't grip enough.

The extra height means they pull about 0.31 lbs each, which is several times the hold of a 2mm disc - so they seat firmly once glued into a socket. A 2mm drill bit makes a clean home for them.

N52 neodymium rare earth magnets. Good for anything you'd normally use screws, catches, or heavier fasteners for, where you still want it to come apart cleanly.

WARNING: More brittle than glass, so don't let them slam together or drop them on a hard floor; they'll crack. Keep them away from anyone who might swallow them, kids or pets included, since magnets that get swallowed can pinch through the intestines and cause serious harm.

Specifications