The Repulsor Land Train is a fully modular sci-fi train with many options. It is highly customizable, giving you the option between engines, cars, propulsion methods, and accessories. The train is connected with openlock clips and enough clips are provided with every option to connect as needed.
Choose from one of the Prebuilt Trains for 20% off or follow the guide below.
Buying Guide:
Step 1- Choose your engine.
Step 2- Choose what cars you want in your train.
Step 3- Choose your propulsion method. You need to purchase 1 propulsion addon for each train piece. For example- if you have 1 engine and 3 cars, you need to purchase 4 of that same propulsion addon.
Step 4- Choose your accessories. If you want to use flight stands, you need to purchase 1 flight stand addon for each train piece, just like with the propulsion method. Plastic rods are included with the rocky variant, but you can also use clear 20mm acrylic rod to make the rods see-through and variable height. If you opt to not use flight stands or the track, the train will comfortably sit on the ground.
Scale:
Four different scales are also available to choose from: 40mm, 28-35mm, 20mm, and 15mm. A 28mm figure is shown on the scaled pictures for comparison. Each car is the same length and width with varying heights. Each train section measures:
40mm scale- 120x288mm or 4.7x11.3 inches. A train with an engine and 3 cars is approximately 45 inches long.
28-35mm scale- 105x253mm or 4.1x10 inches. A train with an engine and 3 cars is approximately 40 inches long.
20mm scale- 74x177mm or 2.9x7 inches. A train with an engine and 3 cars is approximately 28 inches long.
15mm scale- 63x152mm or 2.5x6 inches. A train with an engine and 3 cars is approximately 24 inches long.
Track:
A fully modular track set is available. Using openlock pieces, you can create the perfect layout for your tabletop. The track comes with sliding clips that slot the train into the track so it can be moved without risk of falling off. The pillars that elevate the track are 3 inches in height in the 28-35mm scale. In the photos, those pillars are double stacked, elevating the track 6 inches off the tabletop. They can be stacked higher for a taller track, or you can even double stack another track on top of each other.
Two options are included: A full set and half set. The half set is still plenty of track to use for most tabletops. The following measurements are for the 28-35mm scale. Scale 40mm by 114%, 20mm by 70%, and 15mm by 60%.
The full set includes:
8 6 inch track pieces
6 4 inch track pieces
6 30 deg corners
6 15 deg corners
4 pieces of broken track for track ends
2 train stops with stairs
2 service platforms with ladders
clips for up to 6 train cars to be secured to the track
64 3 inch pillars, enough for 16 sets of connections for 6 inch tall track
3 pillars with rocky outcrops
The half set includes:
6 6 inch track pieces
3 4 inch track pieces
3 30 deg corners
3 15 deg corners
4 pieces of broken track for track ends
1 train stop with stairs
1 service platform with ladder
clips for 6 train cars to be secured to track
44 3 inch pillars, enough for 11 sets of connections for 6 inch tall track
1 pillar with rocky outcrop
All items come unpainted in non-toxic gray PLA. Some assembly may be required. We inspect all of our products prior to shipment, but due to the nature of 3d printing, some objects may require some cleanup prior to use. This item is designed by Multiverse. multiverse-store.com. Tabletop Terrain is a licensed printed of Multiverse.
