Samurai Wooden Wall Set

An authentically-modelled set of wooden walls from old Japan. These walls would have surrounded residential houses of samurai, and lesser houses in both rural and town settings, when the more solid stone walls were not required.

The fence part is 30mm tall (approximately head height on most models), with the wooden roof stretching up to 53mm. Walls can be used with or without the textured bases, and include holes for 5mm x 1mm magnets hidden under the roof, and can be used in conjunction with the Samurai Stone Walls set. Straight and corner sections are included in the set.

The gateway section (also 120mm wide) is approximately 76mm tall, and features detailed hinges and studs to the front and supports to the rear. Small locking brackets are featured on the rear, and the lock beam can actually be removed. The gate hinges are designed to accept 1.75mm PLA filament (or similar diameter pins etc) in guide holes, and actually open and close (see video below) during play if required.

Instructions available here- https://www.3dalienworlds.com/pdfs/SAMURAI_Wooden_Walls.pdf

 What's Included- 

1 Wall piece in 28mm scale requiring assembly. 

All items come unpainted in non-toxic gray PLA. Some assembly may be required. We inspect all of our products prior to shipment, but due to the nature of 3d printing, some objects may require some cleanup prior to use. This item is designed by 3DAlienWorlds and is available on 3dalienworlds.com